201.303 Publication and codification.
(a)
(i) In accordance with FAR 1.301 and DFARS 201.304, the DARS is not required to be codified in Title 48, Code of Federal Regulations nor approved by USD(AT&L)DPAP. Any revisions to the DARS that would require codification shall comply with aforementioned FAR and DFARS cites.
(ii) To the extent practical all DARS text (whether implemental or supplemental) will be numbered as if it were implemental in accordance with DFARS Subpart 201.303-Publication and Codification. Supplemental numbering will only be used when the text cannot be integrated intelligibly with its FAR or DFARS counterpart. DARS supplements must parallel the FAR and DFARS, with the exception that supplemental sections are numbered using 90 or (S-90). Parts, subparts, sections, or subsections are supplemented by the addition of a number of 90 and up. Lower divisions are supplemented by the addition of a number of (S-90) and up. DARS provisions or clauses use a four digit sequential number in the 9000 series, e.g., -9000, -9001, -9002.
(iii) The table shown in DFARS Subpart 201.303(D), DFARS Numbering provides an example of the numbering system. Sample Table with DARS Numbering below
FAR | DFARS Implements FAR As | DFARS Supplements FAR As | DARS Supplements DFARS As |
19 | 219 | 219.70 | 219.70 |
19.5 | 219.5 | 219.570 | 219.570 |
19.501 | 219.501 | 219.501-70 | 219.501-90 |
19.501-1 | 219.501-1 | 219.501-1-70 | 219.501-1-90 |
19.501-1(a) | 219.501-1(a) | 219.501-1(a)(S-70) | 219.501-19(a)(S-90) |
19.501-1(a)(1) | 219.501-1(a)(1) | 219.501-1(a)(1)(S-70) | 219.501-1(a)(1)(S-90) |
(S-90) Subparts will be enumerated using the numbering convention used by the FAR. Sections under subparts will be enumerated using FAR or DFAR numbering conventions, depending on whether the FAR or DFAR is being implemented or supplemented.